Brief introduction:
Nanofiltration membrane 8040(NF1): High removal rate of total organic carbon(TOC ) and medium rejection rate of inorganic salts. It´s embedded with ultra-low pressure and pollution-resistance membrane preparation technology to realize the double improvement of service life and operation energy consumption cut down in the field of advanced treatment of waste water.
Specifications:
Model | NF1-8040 | |
Material | Polypiperazine-amide | |
Structure | Spiral wound | |
Spacer Thickness(mil) | 34 | |
Rejection | NaCl | 30±10 |
MgSO4 | MgSO4 | Greater than or equal to 98.0 |
Permeate flow rate(GPD) | 40/10500 | |
Effective membrane area(m2) | 37 | |
Concentration of Testing Solution | 2000mg/L MgSO4 500mg/L NaCl | |
Testing Pressure(Mpa) | 0.50 | |
Recovery Rate of Single Membrane Element( percent ) | 15 percent | |
Temperature of Testing Solution | 25 degree | |
pH Value of Testing Solution | 6.5-7.0 | |
Operation limits | ||
Max.Working Pressure(Mpa)/GPM | 4.1/600 | |
Max.Feed Flow(m3/h)/GPM | 17/75 | |
Feed pH Range | 2-11 | |
Cleaning pH Range | 1-12 | |
Feed Temperature Range( degree ) | 5-45 | |
Residual Chlorine Control(mg/L) | ＜0.1 | |
Max. Feed SDI(15min) | 5 | |
Max.Feed Turbidity NTU | 1.0 | |
Max. Pressure Drop of Single Element(psi) | 15(0.1Mpa) | |
Notes:
1. The performance parameters are measured after 30 minutes of stable operation of the system.
2.The deviation range of water yield is ±15 percent .
Contact:
Email:Mariosun@water-ts.com
Tag-uri populare: membrana de nanofiltrare 8040(nf1), China, furnizori, producatori, fabrica, personalizat, cumparare, pret, oferta, vrac, de vanzare, in stoc
